How to Set Up Ratio Control | Video

This video will show you how to set up the ratio control on the Pro-EC44 unit.

 

Transcript

To set up ratio control on your Pro-EC44, please press the up and right keys at the same time to navigate to the operator mode for the main menu.

Press the down key 3 times to highlight the configuration menu, then press the right key to enter.

Use the up and down arrows to select the unlock code. This is set to 10 by default, so press the up key 9 times, then press the right key to enter.

Press the down key once and then press the right key to select the control configuration option.

Press the right key again to select control loop 1.

You are now in the control mode menu. Press the down key twice to highlight ‘ratio’ and then press the right key to select it.

On the ‘control select’ menu, press the right key until you reach the control loop ratio – ‘ratio SFAC screen’.

Up the up and down arrows to adjust the stoichiometric factor. Please not this value needs to be specific to your application.

Press the right key to accept the number entered and move to the ratio number.

Again, use the up and down arrows to adjust to atomizing air ratio, this is also an application specific value.

Press the right key to accept the change.

Press the up and right key together 4 t times to return to main menu. The ratio control is now set.

To continue with the setup of other parameters such as the PID set, please work through the main setup menu.

To find out more about products from West Control Solutions, please visit our website on www.west-cs.com

Follow us on:

Enquiry widget

Video-page-EN.gif