How to change the language on PMA KS94

-         Press the enter key for 3 seconds until it displays "Para"

-         Press enter, then go to "contr2.

-         Press enter key (3 seconds) until it displays "conf".

-         Press enter key, you will see C100.

-         Change the C100 to C800 with up arrow.

-         Press the enter key - the first digit starts flashing, then press again enter key until the last digit flashes (this should the language parameter).

-         Using the up or down arrow change the digit until it displays your preferred language.

-         Press enter key until it displays "exit".

Finally press enter key, this should display "wait". Your changes have been stored.